diff --git a/How-one-can-Replace-the-Fluorescent-Starter-in-A-Windhager-Bug-Zapper.md b/How-one-can-Replace-the-Fluorescent-Starter-in-A-Windhager-Bug-Zapper.md
new file mode 100644
index 0000000..03fa227
--- /dev/null
+++ b/How-one-can-Replace-the-Fluorescent-Starter-in-A-Windhager-Bug-Zapper.md
@@ -0,0 +1,7 @@
+<br>Fourmilab is surrounded on three sides by farmland. In the summer season, bugs are everywhere. Faced with this case, defence in depth is the one possibility: window screens, bats, Odonata on the pond, fly strips on the home windows and swatters in every room,  [Zap Zone Defender USA](http://roedu.co.kr/bbs/board.php?bo_table=42_2&wr_id=377138) and as the final degree of terminal defence, high voltage bug zappers with ultraviolet fluorescent lures. These are usually not elegant devices,  [insect elimination](https://rentry.co/68506-zap-zone-defender-the-best-bug-zapper-of-2025) but they get the job finished. The principle couldn't be easier-flying insects, whose compound eyes see long-wave ultraviolet mild that mammalian eyes do not,  [Zap Zone](https://rentry.co/59857-zap-zone-defender-a-comprehensive-study-on-bug-zappers-and-mosquito-control) are attracted by the lure tube, which seems to emit a dim blue gentle to people. To reach the sunshine, they need to fly between wires electrified with between 4 and 8 kilovolts which, when the insect completes the circuit, kill-a-bug. The only disadvantage (a minimum of if you are not a flying insect) is that they do not seem to last very long. After a little bit multiple summer time, the bulb both begins to flash on and off like a strobe gentle or simply refuses to light in any respect.<br>
+
+<br>Replacement bulbs are readily accessible and straightforward to install, but in my experience, no less than half the time replacing the bulb does not fix the problem. With no mild to attract the insects, a [indoor-outdoor zapper](https://safeareamain.com/bbs/board.php?bo_table=free&wr_id=78271) is ineffective, so even though its high voltage subsystem continues to work perfectly, most people junk it when changing the bulb doesn't make it light up. I'm method too low-cost to be pleased with such a state of affairs, so I decided to open up a failed bug zapper and see what was occurring. The supply of the issue proved to be as simple as I expected and as simple to treatment, so in the hope of saving anyone else the trouble of figuring it out, I've scribbled these notes on tips on how to restore your own bug zappers. These instructions pertain to bug zappers made by the Windhager company of Salzburg, Austria, who've a dominant market share in this obscure industry here in Central Europe.<br>
+
+<br>Obviously, if you have a bug zapper made by another firm, it should look different inside and may conceivably use an entirely different circuit for  [Zap Zone Defender](https://rentry.co/32012-case-study-zap-zone-defender---the-best-bug-zapper-of-2025) the fluorescent lamp. Unless you perceive what you are doing and know sufficient electronics to be assured you're not going to do something stupid,  [indoor-outdoor zapper](http://wiki.envirobatbdm.eu/Bug_Zappers_Don_t_Truly_Kill_The_Bugs_That_Are_Bugging_You) it's best to go away issues nicely sufficient alone and get a new bug zapper. Further,  [indoor-outdoor zapper](https://uliwiki.org/index.php/Case_Study:_SMS_Boosts_Pest_Control_Company%E2%80%99s_Growth) we'll be disassembling and modifying a gadget which, when opened up, has uncovered connections to probably lethal mains present and intensely unpleasant if not deadly high voltage. If you're sufficiently stupid or scatterbrained that you're more likely to neglect to drag the mains plug before sticking your hand contained in the guts of a bug zapper,  [indoor-outdoor zapper](https://videoofc.fun/dragon-ball-coisas-que-provavelmente-voce-nao-sabia/) you need to cease reading instantly and choose some safer project, like making microwave popcorn. To begin with, before beginning this process, be sure you try replacing the bulb and see if that fixes the problem.<br>
+
+<br>If it does, you've saved a variety of time and, if not, you're going to wish a replacement bulb eventually, so why not have one on hand when the time comes? If a brand  [indoor-outdoor zapper](https://cruisecontrolcruises.co.uk/mar-bustos/) new bulb does not do the trick, the problem is almost definitely a failed fluorescent starter inside the field, so we'll must open it up. You did remember to unplug the zapper before beginning to disassemble it, didn't you? First, remove the bug catcher tray at the underside of the zapper, taking care to not spill dead bugs all over the ground or your work space. Depending on the mannequin, the two halves of the physique of the bug zapper are fastened along with 4 or six screws. On "industrial" fashions,  [Zap Zone Defender](http://www.career4.co.kr/bbs/board.php?bo_table=ci_consulting&wr_id=126858) these are 2 mm metric machine screws and nuts, however some "consumer" models use infernal "split slot" screws that are intended to keep you from opening up the device. You see, you are a consumer, so you are anticipated to eat-buy, purchase, buy, not mend issues which break.<br>
\ No newline at end of file